Estimated Arrival: Between Dec 06 and Dec 12. *ETA to USA Only
Shipping & Returns: Free Shipping U.S.A wide for All Orders Over $99!
Zortrax M300 Dual Large Volume, Smart advanced LPD Plus Wi-fi 3d Printer
Zortrax M300 DUAL is an award-winning High-Performance, Versatile, Reliable and Efficient Desktop Printing Workhorse,With advanced LPD Plus Technology. Combine with Zortrax HEPA-Cover for Maximum Print Quality.
M300 Dual 3D LPD Plus Printer was designed for hard work, ease of use and accessibility with 3D printing farms and prototyping in mind.
ZORTRAX M300 DUAL MAIN FEATURES-
Large volume dual extrusion
The M300 Dual can simultaneously print with both model
and water-soluble support filaments in a large build volume
measuring 265 x 265 x 300 mm. This makes it capable
of printing big models needed in industries like aerospace,
automotive, or architecture.
Zortrax M300 Dual is a Plug & Play device ready for high quality 3D printing right out of the box. The printer can be controlled via an intuitive touchscreen or remotely via Wi-Fi or Ethernet network. Automatic firmware updates introduce new functionalities and UI improvements on a regular basis.
3D printing big models in one go
Large workspace in Zortrax M300 Dual allows printing big models in one go without breaking them down into separate parts that need to be assembled. That's particularly important when durability is of the essence as joints are usually the weakest spots in the structure.
Zortrax M300 Dual 3D printer is designed to reliable operation in multiple long printing cycles typical for a machine of that size. Made with high-quality components, it offers low-maintenance costs and compatibility with a wide range of filaments.
Large print volume 265 x 265 x 300 mm.
Large workspace, measuring 265 x 265 x 300 mm is enough to print big models in one go.
Wide filaments compatibility
The printer is designed to support wide range of dedicated and third-party filaments.
3D printing process can be remotely monitored through a built-in camera.
Fail-Safe Print & Material end detection
Blackout response system prevents failures if power is disrupted.
The printer will automatically switch into pause mode when it runs out of filament.
The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.
Advanced extruder and nozzle
An extruder with a nozzle geometry designed to support 3D printing with flex and nylon-type materials.
ZORTRAX HEPA COVER FEATURES
- Maintains stable temperature inside the printing chamber to reduce warping of ABS-based materials
- Carbon filter eliminates unpleasant smells
- HEPA filter catches over 99% of 3D printing emissions, including ultra fine particles
- Electric fan with regulated speed
The Zortrax M300 Dual can simultaneously print with both model and water-soluble support filaments in a large build volume measuring 265 x 265 x 300 mm. This makes it capable of printing big models needed in industries like aerospace, automotive, or architecture.
With a capacitive displacement sensor, the M300 Dual can automatically calibrate to work with glass, perforated, or other types of build platforms. This way it’s possible to customize the printer for the project at hand.
Made with mass production in mind- multiple Zortrax M300 Dual 3D printers can be connected via Wi-Fi or Ethernet network to work in large, remotely controlled clusters. Such 3D printing farms can be used for bridge manufacturing or small to medium-scale production.
The Working cycles on large volume 3D printers tend to be longer than on smaller machines which makes reliability even more important. The M300 Dual is based on a proven M300 design capable of running for many hours without failure at world-leading organizations like NASA.
ZORTRAX M300 Plus works with all 1.75 mm filaments available on spools. It can print with challenging materials like flexible TPU or with highly durable nylon. Professional users are thus free to choose the right filament for their projects and rely on the 3D printer to handle it with no issues.
The printer can detect when the filament ran out or jammed. In both scenarios, the print is paused and a notification is sent to the user. The work can be resumed from the same spot when the problem is solved.
Main features of Z-SUITE 2 for dual-extrusion technology
Z-SUITE is a dedicated slicing application that also works as a wireless command center of smart, reliable Zortrax 3D printers with Wi-Fi capability. It was a variety of functionalities enhancing the experience of using Zortrax M300 Dual.
Raft-free 3D printing
Z-SUITE 2 supports raft-free 3D printing. A glass build platform is recommended for this option.
Rotation optimization tool
The model's position on the build-platform can be optimized to reduce support or printing time.
Models can be easily replicated to fit multiple parts of the same design on the build platform.
Thin wall detection
Z-SUITE 2 highlights the walls too thin to be printed properly to prevent failed prints.
- Large volume dual extrusion
IN THE BOX
3D Printer, Side Covers, Z-SUITE, Starter Kit, Spool of Model Material, Spool of Support Material, 1x Perforated Plate, 1x Glass Plate, 2x Spool Holders, Material Box, USB Memory Stick
265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)
0.4 mm (0.016 in)
Dual, printing with model and support material
Extruder cooling system
Two fans cooling the extruder; radial fan cooling the print
Heated ; perforated and glass plates are applicable
2 x mechanical
WiFi Ethernet USB
4” IPS 800 x 480
Dedicated for Single Extruder
Z-ABS, Z-ASA Pro, Z-FLEX, Z-GLASS, Z-HIPS, Z-NYLON, Z-PETG, Z-PLA, Z-PLA Pro, Z-ULTRAT,Z-ULTRAT Plus
Dedicated for dual
Z-ABS, Z-ASA Pro, Z-ESD, Z-GLASS, Z-NYLON,
Z-PETG, Z-PLA, Z-PLA Pro, Z-SUPPORT ATP,
Z-SUPPORT Premium, Z-ULTRAT, Z-ULTRAT Plus
Mechanically removed – printed with the same material as the model
Water-soluble – printed with a different material than the model
1.75 mm (0.069 in)
LPD Plus (Layer Plastic Deposition Plus) – advanced
technology depositing melted thermoplastics
with dissolvable support structures
Minimal wall thickness
Automatic measurement of platform points’
height / manual measurement of platform
310 °C (590 °F)
105 °C (221 °F)
20-30 °C (68-86 °F)
0-35 °C (32-95 °F)
110 V ~ 5.9 A 50/60 Hz
240 V ~ 2.5 A 50/60 Hz
Supported input file types
.stl, obj, .dxf, .3mf, .ply
Supported Operating System
Mac OS Mojave* / Windows 7 and newer
We work extremely hard to make sure that we offer the outright finest rates online. If you locate one more online shop that offers a lower cost than us within fourteen days of your purchase date, please let us know and we will restore the difference from your original payment as a store credit.
Shop with confidence. We want you to know that you are getting the absolute best price for the items you are purchasing. If you find that our very own web site has a reduced cost for the same item you have actually purchased within fourteen days of your day of purchase we will restore the difference as a store credit as well.
To request your store credit simply e-mail us a web link to the same item on our web site, or on our rival's website within fourteen days from the date of your order and we will process the credit accordingly.
Our Price Match Guarantee has a few simple rules:
- You must purchase the item from our website before requesting your Price Match Guarantee.
- Promotions such as rebates and "buy one, get one free" offers are not eligible.
- The item must be in stock on the competitor's website.
- The competitor must be an online store, they may NOT have a retail location.
- The website cannot be a discounter or auction website (ie; eBay, overstock, etc..)
- The competitor must be an Authorized Retailer of the product in question.
- The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax.
- The Price Match Guarantee does NOT include items that are shipped outside of United States and Canada.
QUESTIONS & ANSWERSAsk a Question
What to do if the print cracks?
• make sure that the side covers are installed, • make sure that the model is correctly designed and arranged in the workspace, • try adjusting the print settings differently by changing the level of infill and the model's arrangement in the workspace, • provide proper temperature in the printing room.